Ultimaker 3 Maintenance Kit

$399.90 Inc GST

The Ultimaker 3 is a robust machine and will not fail you, but regular machine maintenance is always recommended. Here are the recommended procedures for every three months of machine use:

Check for play on the axles
Ensure proper belt tension
Clean fan on the front of the tool head
Clean print cores
Lubricate Z axis lead screw

 

Category:

The Ultimaker 3 is a robust machine and will not fail you, but regular machine maintenance is always recommended. Here are the recommended procedures for every three months of machine use:

Check for play on the axles
Ensure proper belt tension
Clean fan on the front of the tool head
Clean print cores
Lubricate Z axis lead screw

In addition, Ultimaker recommends a cleaning of the extruder gears and replacement of the bowden tubes every year. Keep in mind that these figures are based on 1500 machine hours per year, and if you are using your Ultimaker 3 more than that this maintenance cycle should be accelerated.

PACKAGE CONTENTS
2x Bowden tube
1x XY calibration sheet
1x Calibration card
1x Glass plate
1x Hex screwdriver 2.0
5x Silicone nozzle cover
4x Clamp clip
4x Tube coupling collet
2x Build plate clamp
1x Ultimaker 3 cleaning filament
1x Axial fan
2x Radial fan