Print Cores 0.25 to 0.8 AA and 0.4 & 0.8 BB

Print Cores 0.25 mm to 0.8 mm AA and BB compatible with Ultimaker 3, S3, S5, Pro Bundle

• Material matching: Get consistent, high-quality 3D printing results with customised nozzle geometry per material
• Quick-to-change: Quickly swap print cores and switch between different material combinations for a more time-efficient workflow
• More materials: Select from a huge portfolio of materials, including PLA, ABS, CPE, Nylon, and PP (CPE+, PC, TPU 95A, and Breakaway are not officially supported for 0.25 Print Core AA)
• Accurate temperature reading: Maintain the perfect temperature for an even better quality print – with automatic, accurate temperature readings

Material Compatibility

Print core AA: PLA, ABS, CPE, CPE+, Nylon, PC, TPU 95A, PP, Breakaway
***Do not use Print core AA for PVA support material

***0.25 Print core AA: PLA, ABS, CPE, Nylon, PP (CPE+, PC, TPU 95A, and Breakaway are not officially supported for 0.25 Print Core AA, please use 0.4mm Print Core AA for these materials)

Print core BB: PVA
*Do not use Print core BB for build materials (e.g. PLA, ABS, CPE, CPE+, Nylon, PC, TPU 95A, PP, Breakaway)

Please note that new versions of the print core do not have silicon rings.

"The silicone nozzle ring has been removed from the nozzle of the print cores. The groove in the nozzle to fixate the silicone nozzle ring will also be removed on a short term. This applies to the print cores that come with the printer, as well as print cores that were purchased separately. This change is implemented to make the print cores compatible with the Ultimaker S5. Due to the nozzle cover of the Ultimaker S5, the front fan bracket will not close properly if the silicone nozzle ring is around the nozzle. On the Ultimaker 3, the silicone nozzle ring helps to close the seal between the nozzle and the silicone cover. However, R&D has decided the risk of removing the ring is negligible.