Cleaning Filament
$32.46 Inc GST
Used for both print core maintenance and unclogging procedures. We recommend performing regular maintenance once every three months. Unclog the print core if there is no material extruding from the nozzle for at least ten minutes. Can also be used on 2+ connect nozzles.
This filament can be used to clean print cores and nozzles by applying hot and cold pulls. Hot pulls are used to get the biggest parts of carbonized material out of the print core and are highly recommended when the print cores or nozzles are clogged. With a cold pull, the remaining small particles will be removed, ensuring the print core or nozzle is completely clean.
Used for both print core maintenance and unclogging procedures. We recommend performing regular maintenance once every three months. Unclog the print core if there is no material extruding from the nozzle for at least ten minutes. Can also be used on 2+ connect nozzles.
This filament can be used to clean print cores and nozzles by applying hot and cold pulls. Hot pulls are used to get the biggest parts of carbonized material out of the print core and are highly recommended when the print cores or nozzles are clogged. With a cold pull, the remaining small particles will be removed, ensuring the print core or nozzle is completely clean.
Additional information
| Weight | 1 kg |
|---|
