Ultimaker 2.85 mm CPE
$88.90 Inc GST
CPE is perfect for complex technical prints, it’s fairly stiff, strong and impact resistant. It’s also particularly good at bridging large gaps.
CPE requires a higher print temperature compared to PLA. CPE is easier to print than ABS and is very strong. It can be used for mechanical parts that do not heat up and for parts that could benefit from some flexibility. In contrary to ABS it can bend a little bit.
It’s safer in terms of fumes and particle emissions while printing. It’s also chemical resistant and is said to be water-tight. CPE can not be made smoother using chemical vapours.
Ultimaker CPE Filament
Weight: 0.75kg
Diameter: 2.85mm
Length: Approximately 90m long
CPE is perfect for complex technical prints, it’s fairly stiff, strong and impact resistant. It’s also particularly good at bridging large gaps.
CPE requires a higher print temperature compared to PLA. CPE is easier to print than ABS and is very strong. It can be used for mechanical parts that do not heat up and for parts that could benefit from some flexibility. In contrary to ABS it can bend a little bit.
It’s safer in terms of fumes and particle emissions while printing. It’s also chemical resistant and is said to be water-tight. CPE can not be made smoother using chemical vapours.
Additional information
| Weight | 0.75 kg |
|---|---|
| Colour | Black, Blue, Dark Grey, Green, Light Grey, Red, Translucent, White, Yellow |
